Euromacchine - Products: machine for building

PLASTER MACHINE J - 5 2000
		Demountable plaster machine for pulverising pre-mixed plaster, thick plaster, self-levelling plaster and light putty. With a series of accessories it can be turned into: - A continual cycle kneading machine. - A pulveriser for hanging, isolating and finishing putty. Easy to disassemble in parts to be transported manually. It can even be transported by cranes using the holds designed for this purpose.
T E C H N I C A L C H A R A C T E R I S T I C S
Mixer engines	5,5 kW - 380 g/min - 220 V / 380 V - 50 Hz
Loading engine	0,55 kW - 30 g/min - 220 V / 380 V - 50 Hz
Electrical cable	5x4 - 32 A
Total machine weight	260 Kg
Mixing pump weight	75 Kg
Trolley weight	70 Kg
Chute weight	85 Kg
Compressor weight	30 Kg
Transport distance	30 m - 20/30 bar
Total height	156 cm max
Total lenght	115 cm max
Total width	72 cm max
Filling height	89 cm
Chute capacity	150 lt.

CONTINUAL HORIZONTAL TROLLEY MIXER
		The continual horizontal trolley mixer is an automatic, continual cycle mixer with a 5.5 kW to 380 V engine. Suitable for industrial use for all types of pre-mixes, either putty, liquid mortar for floors, repair work mortar, mortars with lime and plaster with thick grain for loading straight from silos using blowing meshes or from sacks in the conventional manner. The mixer control panel is protected against water splashing and conforms with EEC regulations. It can be controlled manually with remote control or with a probe. The mixer also has water equipment which includes a pump, wheels to facilitate transport and it can be disassembled into parts to make transport easier. The techniques used for its construction and assembly make it easy and versatile for everyday use with 35 to 100 L/min performance. *Optional accessories:* - Probe for automatic control - Remote control - 50 m of 4 x 2.5 electrical cable, double protection with pin and plug. - 50 m of Geka c/att. water tube.
T E C H N I C A L C H A R A C T E R I S T I C S
Motor reduction unit	5,5 kW - 280 g/min - 380 V - 50 Hz - 12,5 A
Water pump	0,37 kW - Capacity 40 l/min. - water link 3/4tube 10 bar
Mixing capacity	35 - 100 l/min. depending on headstock spindle and material
Total weight	145 Kg
Link	through electric cable 4 x 2,5
Total height	66 cm max
Total length	210 cm max
Total width	103 cm max

SILO CONTINUAL HORIZONTAL MIXER
		The silo continual horizontal mixer is suitable for the continual mixing of materials pre-mixed in silos, pre-mixed mortars and plasters, wall mortars, repair and self-levelling mortars with 35 to 100 L/min performance. The mixer can used straight under silos using a flanger. The control panel is protected from water spillage and conforms with EEC regulations. Vibrator pauses are controlled straight from the control panel. The mixer also has water equipment which includes a pump and it can be disassembled into parts to make transport easier. The techniques used in its construction and assembly make it resistant and suitable for use even by operators with little training. *Optional accessories:* - Probe for automatic control - Remote control - 50 m of 4 x 2.5 electrical cable, double protection with pin and plug. - 50 m of Geka c/att. water tube.
T E C H N I C A L C H A R A C T E R I S T I C S
Motor reduction unit	5,5 kW - 280 g/min - 380 V - 50 Hz - 12,5 A
Water pump	0,37 kW - Capacity 40 l/min. - 42V - water link 3/4tube 10 bar
Mixing capacity	35 - 100 l/min. depending on headstock spindle and material
Total weight	110 Kg
Link	through electric cable 4 x 2,5
Total length	210 cm max
Total width	40 cm max

ELECTRICAL FLATTENING MACHINE