| Modell | Szivattyú | Motor | ||||||
|---|---|---|---|---|---|---|---|---|
| Típus | Márka | Modell | BEP (mc/h @ m) | Max. áramlás (mc/h) | Max. emelőmagasság (m) | S x D | Szilárd anyagok | Névleges teljesítmény kW/hp |
| 6-CN-600/40 | Cornell | 6RB | 600 @ 40 | 965 | 93 | 250×150 | \ | 110 / 147 @ 1800 |
| 6-CN-600/75 | Cornell | 6HH | 600 @ 75 | 931 | 110 | 200×150 | \ | 175 / 234 @ 1800 |
| 6-CN-600/90 | Cornell | 6HH | 600 @ 90 | 931 | 110 | 200×150 | \ | 260 / 348 @ 1800 |
| 6-CN-700/40 | Cornell | 6RB | 700 @ 40 | 965 | 93 | 250×150 | \ | 121 / 162 @ 1800 |
| 8-CN-700/60 | Cornell | 8H | 700 @ 60 | 1.248 | 94 | 250×200 | \ | 175 / 234 @ 1800 |
| 8-CN-700/90 | Cornell | 8NHTA | 700 @ 90 | 1.158 | 107 | 250×200 | \ | 260 / 348 @ 1800 |
| 8-CN-800/60 | Cornell | 8H | 800 @ 60 | 1.248 | 94 | 250×200 | \ | 175 / 234 @ 1800 |
| 8-CN-800/75 | Cornell | 8NHTH | 800 @ 75 | 2.133 | 140 | 250×200 | \ | 260 / 348 @ 1800 |
| 8-CN-800/110 | Cornell | 8NHG19 | 800 @ 110 | 1.589 | 190 | 250×200 | \ | 375 / 502 @ 1800 |
| 10-CN-900/40 | Cornell | 10RB | 900 @ 40 | 1.589 | 93 | 250×250 | \ | 175 / 234 @ 1800 |
| 8-CN-900/60 | Cornell | 8NHTA | 900 @ 60 | 1.158 | 107 | 250×200 | \ | 260 / 348 @ 1800 |
| 8-CN-900/75 | Cornell | 8NHTH | 900 @ 75 | 2.133 | 140 | 250×200 | \ | 375 / 502 @ 1800 |
| 8-CN-900/90 | Cornell | 8NHG19 | 900 @ 90 | 1.589 | 190 | 250×200 | \ | 375 / 502 @ 1800 |
| 8-CN-1000/60 | Cornell | 8NHTH | 1000 @ 60 | 2.133 | 140 | 250×200 | \ | 260 / 348 @ 1800 |
| 8-CN-1000/90 | Cornell | 8NHTH | 1000 @ 90 | 2.133 | 140 | 250×200 | \ | 375 / 502 @ 1800 |
| 10-CN-1100/40 | Cornell | 10RB | 1100 @ 40 | 1.589 | 93 | 250×250 | \ | 175 / 234 @ 1800 |
| 8-CN-1100/75 | Cornell | 8NHTH | 1100 @ 75 | 2.133 | 140 | 250×200 | \ | 375 / 502 @ 1800 |
The Comap InteliGen 500 is an advanced control unit with a wide range of functions and a high-resolution display. Thanks to the WebSupervisor cloud application and the GPS receiver, the platform provides complete and fast control of your fleet of pump units from any connected mobile device. With WebSupervisor, it is possible to start, stop, monitor, and adjust the settings of the machines from miles away.
Engine speed indicators
Indicators for correct working point
ON/OFF switch
Timer based on operating hours
Absorbed power signals
Pump/motor protection
Event history
Anti-theft protection
The CIM 136 is the Elcos control unit for manual and automatic operation via external contact, equipped with an integrated GSM modem that allows remote control of the pump unit through an app. Without operator intervention, the CIM 136 automatically monitors all its parameters and alarms. Thanks to the actuator, it can perform automatic adjustments to maintain constant irrigation pressure.
Protection activation
Automatic monitoring anomalies
Automatic acceleration and deceleration
Electronic water pressure transmitter
Emergency stop
Timer to start or stop
Pump protection exclusion
GSM modem for remote control
CIM 130 is an Elcos control unit for manual and automatic operation via external contact. Without operator intervention, the CIM 130 automatically monitors all its parameters and alarms. Thanks to the actuator, it can perform automatic adjustments to maintain constant irrigation pressure.
Protection activation
Automatic monitoring anomalies
Automatic acceleration and deceleration
Pump protection exclusion
Emergency stop
Timer to start or stop
Oil and battery indicator lights
Electronic water pressure transmitter
The Elcos local control unit is the most widely used because it provides all the basic controls and automatically monitors all its parameters and alarms without any operator adjustments.
Hour meter and tachometer
Timer
Emergency stop
Oil and pump water pressure gauge
Protection activation