| Modell | Szivattyú | WEG Motor | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Típus | Márka | Modell | Munkapont (mc/h @ m) | Hatékonyság (%) | Fogyasztás (kW) | NPSHr (m) | S x D (mm) | Sebesség (RPM) VFD-vel | Névleges teljesítmény (kW) |
| E6-CN-600/40 | Cornell | 6RB | 600 @ 40 | 89 | 74 | <5 | 250×150 | 1650 | 90 kW – 4P – IE4 |
| E6-CN-600/75 | Cornell | 6HH | 600 @ 75 | 86 | 142 | <5 | 200×150 | 1760 | 160 kW – 4P – IE4 |
| E6-CN-600/90 | Cornell | 6HH | 600 @ 90 | 84 | 173 | <5 | 200×150 | 1900 | 200 kW – 4P – IE4 |
| E6-CN-600/110 | Cornell | 6822MX | 600 @ 110 | 76 | 239 | <5 | 200×150 | 1780 | 315 kW – 4P – IE4 |
| E10-CN-800/40 | Cornell | 10RB | 800 @ 40 | 84 | 116 | <5 | 250×250 | 1700 | 160 kW – 4P – IE4 |
| E8-CN-800/60 | Cornell | 8H | 800 @ 60 | 88 | 148 | <5 | 250×200 | 1760 | 200 kW – 4P – IE4 |
| E8-CN-800/75 | Cornell | 8NHTH | 800 @ 75 | 81 | 200 | <5 | 250×200 | 1820 | 250 kW – 4P – IE4 |
| E8-CN-800/90 | Cornell | 8NHG19 | 800 @ 90 | 81 | 273 | <5 | 250×200 | 1700 | 315 kW – 4P – IE4 |
| E8-CN-800/110 | Cornell | 8NHG19 | 800 @ 110 | 79 | 301 | <5 | 250×200 | 1800 | 355 kW – 4P – IE4 |
With this system, the ComAp InteliGen 500 control unit manages the inverter (VFD). Thanks to this setup, it is possible to integrate all the specific irrigation functions for pump control and protection, as well as the hydraulic circuits it powers. Additionally, through the WebSupervisor cloud application, the platform offers complete and quick control of your electropump fleet from any connected mobile device.
Manual and automatic mode for pressure maintaining
Pump and system protections
Automatic priming (optional)
Remote monitoring and control
Mains measument (Voltage, current, frequency)
Flow switch management
Real-time flow rate reading (if flow meter installed)
Tailored functionalities to meet client needs
Electrical panel with inverter (VFD) housed in a sheet metal cabinet. Ideal for basic operations to control the electric pumping station, with local functions accessible via start and stop buttons and a multifunction potentiometer.
Start/Stop
Automatic mode: maintenance of pressure set point
Manual mode: RPM priority